JFX PLUS
- High Speed
- Post-curing unit
- High resolution of 1200 x 1200 dpi and variable drops
- Environmentally friendly printing
- Download Brochure
Description
Experience the great benefits of UV LED printing combined with a dramatic increase in productivity.
Always striving for the best, Mimaki has achieved significant productivity enhancements for its flatbed UV LED printer series JFX with up to 80 % higher speeds.
The new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models.
A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates.
In addition, Mimaki’s IMS* technology ensures the highest image quality exceeding your customers’ expectations.
*IMS=Intelligent Microstepping System
Specifications
| JFX-1631plus | JFX-1615plus | |||
|---|---|---|---|---|
| Head | On-demand Piezo head | |||
| Print resolution | 300 × 600 dpi, 450 × 600 dpi, 600 × 600 dpi, 600 × 1200 dpi,1200 × 1200 dpi |
|||
| Ink | Type | LH-100 UV ink (C/M/Y/K/W/CL) | ||
| LF-140 UV ink (C/M/Y/K/Lc/Lm/W) | ||||
| LF-200 UV ink (C/M/Y/K/W) | ||||
| Capacity | 600 ml ink pack | |||
| Maximum print width (W) × (D) | 1,602 × 3,100 mm (63.1 × 122 “) |
1,602 × 1,500 mm (63.1 × 59.1 “) |
||
| With post-curing unit | 1,602 × 2,700 mm (63.1 × 106.3 “) |
1,602 × 1,100 mm (63.1 × 43.3 “) |
||
| Print accuracy | Absolute accuracy | ± 0.3 mm (0.01 “) or ± 0.3% from specified print distance | ||
| Repeatability | ± 0.2 mm (0.01 “) or ± 0.1% from specified print distance | |||
| Perpendicularity | ± 0.5 mm / 500 mm (0.02 / 19.7 “) | |||
| Usable media | Size (W×D) | 1,644 × 3,194 mm (64.7 × 125.7 “) |
1,644 × 1,594 mm (64.7 × 62.8 “) |
|
| Thickness | Max. 50 mm (2 “) | |||
| Weight | Less than 50 kg (110.2 lbs.) (when the media is loaded evenly) |
|||
| Media table | Air suction by vacuum | |||
| Vacuum area | Vertically divided into 4 zones | Vertically divided into 2 zones | ||
| UV unit | Equipped with UV Light Emitting Diodes | |||
| Lifetime *1 | About 10,000 hours | |||
| Post-curing unit | UV unit | Equipped with fluorescent UV tube lamp *2 | ||
| Lifetime *1 | About 1,000 hours *3 | |||
| Power specifications | 1-phase : AC 200 – 240 V, 50/60 Hz, (power from main unit) |
|||
| Power consumption | Less than 400 VA | |||
| Dimensions / Weight (W) × (D) × (H) |
1,980 mm × 185 mm × 300 mm / 13 kg (78 × 7.3 × 11.8 ” / 28.7 lbs.) |
|||
| Interface | USB 2.0 | |||
| Applicable standard | VCCI class A, CE Marking, CB Report, UL, RoHS Directive | |||
| Power specifications | AC 200 – 240 V, 50/60 Hz | |||
| Power consumption | Less than 2.0 kVA | |||
| Operational environment | Temperature | 15 – 30 °C (59 – 86 °F) | ||
| Humidity | 35 – 65 %Rh | |||
| Temperature accuracy | 18 – 25 °C (64.4 – 77 °F) | |||
| Temperature gradient | Less than ± 10 °C/h (18 °F) | |||
| Dust | Equivalent to normal office level | |||
| Dimensions (W) × (D) × (H) | 4,200 × 4,300 × 1,600 mm (165.4 × 169.3 × 63 “) |
4,200 × 2,620 × 1,600 mm (165.4 × 103.1 × 63 “) |
||
| Weight | 1,613 kg (3,556 lbs.) | 1,313 kg (2,894.6 lbs.) | ||
*1 Reference value. There is no guarantee as to the lifetime.
*2 Post-curing unit is equipped with 3 fluorescent UV tube lamps in one set.
*3 After about 1,000 hours of usage illumination level declines by about 20%.
・Inks would not be cured when printing speed is faster than that of draft mode.
- All trademarks or registered trademarks are the property of their respective owners.
- Specifications are subject to change without notice.
- Some of the screens and printing samples in this website are artificial renderings.
- Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
Inks and substrates:
- Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
- Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:
- Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
- Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
- In addition, please read the instructions and guidelines of the manual carefully and follow those.
